Thin ties: tying technique and wearing rules

Thin ties: tying technique and wearing rules
  1. Peculiarities
  2. How to tie?
  3. What to wear with?
  4. Stylish looks

Thin men's ties, better known as "herring", have firmly established themselves among the leading trends in men's fashion. In the overwhelming majority of cases, they are worn by young men, as well as adolescents, so such accessories often complement the bow of a young man at graduation and weddings. In our review, we will talk about features of narrowed ties, we will give recommendations on what to combine them with, and introduce you to popular knot options.

Peculiarities

A narrow tie is a very stylish, albeit a bit seasonal, accessory. Every young man who is not indifferent to how he looks should have such an item in his wardrobe. Thin ties were very popular in the 50's and 60's. last century, however, and in the 80s. they could still be found on some mods.

Later they forgot about ties, but, as they say, “everything new is a well-forgotten old”, therefore narrow ties, which are popularly called “herring”, and among experts in the fashion industry, "skinny ties" are again at their peak of popularity today.

Most often in boutiques there are models from 5 to 7 cm wide, but The most common are accessories with sizes from 3.5 to 6.3 cm. Narrower pieces are optimal for a retro look, while wide pieces are more traditional accessories. As for the length, then, as is the case with wide ties, it is approximately 140 cm depending on the manufacturer.

In the tied state, the tip of a correctly selected tie should reach the level of the trouser strap, but not overlap it, but only reach the buckle, leaving a gap of 2-4 cm.

How to tie?

To make the herring look as stylish as possible, it is important not only to correctly combine it with a business suit and other wardrobe items, but also to tighten it correctly. There are several basic schemes that will allow the stronger sex to learn how to design a solid, but at the same time spectacular knot.

Men planning wear a skinny tie to work, it is advisable to know at least a couple of basic options for knots - in this case, you can diversify your everyday look, and this will certainly be appreciated by your partners and work colleagues.

And if you are going to tie a tie for a wedding, as well as graduation or some other important event, then it is advisable to practice in advanceotherwise, your preparations may take too long on the day of the celebration. We invite you to consider in more detail the main schemes for tightening male skinny step by step... This will allow you to get a really neat and stylish knot.

Four

This method is considered one of the easiest and at the same time the most versatile. It can be appropriate for any event, in any setting. At the same time, even a teenager can cope with the technique. The process of tightening a skinny tie with this method involves several basic steps.

  1. The tie must be placed around the neck so that its wider half is slightly lower than the narrowed one.
  2. The wide part is placed directly on the narrow one, after which it extends from the narrow edge.
  3. The wide section is then placed back on the narrow section.
  4. The wide end is then pulled through the tie, which is fixed to the neck.
  5. Then they drag it through the loop formed as a result of previous manipulations.
  6. The wide edge is carefully tightened until a tight knot is formed.
  7. In the end, it remains only to gently straighten both the tie itself and the knot.

"Four" looks beautiful both within the framework of the classic style, and effectively emphasizes the informal bow. Parents of boys need to be sure to teach this knot to their student so that he can get ready for classes on his own.

Small knot

Such a tie looks very elegant and sophisticated, but at the same time it is always stylish. The tying method is slightly more difficult than the previous one, but after a little practice, the tie will tighten without problems. To do this, you need to perform several sequential steps.

  1. The tie is laid out so that its wide edge is below the narrowed one.
  2. A wide edge is threaded under a narrow one, while its back should be on top.
  3. Then the wide end must be held inward between the tie and the shirt.
  4. Further, a wide strip is brought forward directly in front of the node.
  5. Next, you need to once again draw it between the tie and the collar of the shirt.
  6. The wide edge should be pulled down through the loop until the knot is fully tightened.
  7. After that, you should straighten the tie - and the stylish bow is ready.

This technique requires more skill, and for the knot to come out perfect, you need to practice several times. This option looks harmoniously with classic blazers and a white shirt, and it is also very appropriate in combination with cardigans and vests.

Half-windsor

Another common version of the node, which was appreciated by amateurs. classic style... However, those men who wear a tie from time to time also prefer this option.

Such a knot looks harmoniously in tandem with casual suits, as well as traditional shirts. Tightening involves several steps.

  1. The tie is placed around the neck so that the wider part is slightly lower than the narrow one.
  2. The wide edge is placed on the narrow one and held under it.
  3. A wider strip is pulled between the neck and the tie itself, then placed on top of the tightened knot.
  4. Next, you should re-stretch it between the collar and tie.
  5. At the end, the wide part is put in a loop, tightened and straightened.

This knot tying option is more difficult than all of the above. However, if a man can tighten the four and the small knot, then the half-windsor will come out without any problems.

Simple knot

If you can't manage to tie all the previous knots, you can try to form the simplest one. It is not difficult to make it, while it looks quite stylish. The technology includes several steps.

  1. The tie is placed on the neck with the back up.
  2. The wide and narrow edges are leveled so that the wide strip is below the narrowed one.
  3. The narrow part is placed on the wide one.
  4. The wide part is wrapped around the narrow one and pulled into a formed loop.
  5. After that, all that remains is to tighten the knot and carefully straighten it.

This method is considered the easiest, it will be an ideal solution for the stronger sex, tying this accessory only from time to time.

Eldridge

For those men who are not looking for easy ways and strive to maintain their own elegant image in any situation, you can advise this technique relevant for fashionistas. Weaving includes more than 10 steps, so you need to familiarize yourself with all the necessary manipulations as much as possible.

You can tighten this stylish knot as follows.

  1. The tie is placed around the neck in such a way that the narrow strip lies on the right side and the wide one on the left side.
  2. The wide side is pulled to the level of the belt or even slightly below the level of the buckle.
  3. The narrow part is placed under the wide strip in a crosswise manner.
  4. A wide strip is wrapped in a narrow part, moving to the right.
  5. The narrow side is pulled at the neck, forming a loop.
  6. Next, make one turn with a narrow part - it must be pulled out to the left.
  7. After that, a narrow strip is led around a wide one, as a result, the first tie knot is made in the direction from left to right - for this, the strip must be pulled to the loop on the neck so that the back is outside.
  8. Then the herring is led down and to the left, right under the wide end of the tie.
  9. A narrow strip is pulled through the loop at the front of the knot.
  10. Next, stretch the narrow edge to the left, slightly tightening the resulting knot.
  11. The same strip is thrown from the outside into the loop located on the left neck, leading the tip down.
  12. The narrow side is tucked under the collar formed from the tie, moving to the right side so that the narrow edge comes out on the right. After it you need to pass it through the newly formed loop from the outside.
  13. If you slightly pull the narrow part of the tie to the left, you can quickly tighten the knot.
  14. The small narrow edge of the herring remaining after all the performed manipulations is carefully wrapped inward.

Of course this the weaving method differs sharply from all standard methodsbecause it involves an exceptionally narrow side. Outwardly, a similar knot looks like an ear of cereals; in its dimensions it even exceeds the classic Windsor knot.

Please note that in case of incorrect weaving as well as if used carelessly, the knot easily disintegrates, therefore, this technology must be honed for a long time with hard training.

For how to tie a tie with the Eldridge knot, see the next video.

What to wear with?

In order for a skinny tie to look like a real adornment of a man's image, you should correctly combine it with the rest of your wardrobe. Stylists provide several guidelines.

  • The jacket should be selected in accordance with the size of the tie - for thin skinny, there will be more models with tapered lapels are appropriate.
  • Highly it is important to correctly combine a jacket, tie and shirt. If there is a print on a jacket or shirt, then the accessory must certainly be monochrome. If a shirt with a jacket without a pattern, then a skinny can be with or without patterns.
  • "Herring" is very looks nice with a short sleeve shirt - such models are usually chosen by teenage boys, while a mature man looks ridiculous in such a form.
  • The same applies to wearing shirts worn out, that is, not tucked into trousers... On young young people and adolescents, such combinations look very stylish and in some ways even daring. But such a shirt will add untidiness and slovenliness to the image of an adult.
  • Skinny is the only tie model that looks harmonious with jeans... However, please note that in this case, the overall style should be slightly sloppy.

Tip: when buying a tie, first of all, you should proceed from the complexion of a man.

So, "Herring" can be afforded by slender and fit representatives of the stronger sex, but large and obese men should make a choice in favor of wider products. Herring ties in themselves are considered a bright and eye-catching piece of men's wardrobe.

However, the tie can be combined with some other accessories. Skinny looks good with small jewelry - clips, cufflinks and watches, large elements will create a significant dissonance in the bow.

As we already mentioned, a mandatory attribute in combination with a narrowed tie should be a clip... This is due to the peculiarities of the material, which cannot stay in one place, constantly bends or dangles. The man himself may not see such negligence, however, his bow from the side will seem completely spoiled.

Ditching clamps is only acceptable if you're pairing a tie with jeans for a relaxed look. In tandem with a formal suit, this accessory is essential.

The clip should hold the tie tightly, for thin skinny it is advisable to choose not too long modelso that it does not overstep the boundaries. The clamp must be thin, without any decors - it is best to use metal products covered with silver or gilding, a light print is allowed. Products with stones and bright decorations within this look will be inappropriate.

The rule of brevity and modesty also applies to cufflinks. It is best if they make up one set with clips, although this is not necessary - it is important that they match well with each other and as a whole make up a stylish and organic look.

If you use a tie to decorate a classic business style, then cufflinks should be chosen in one color scheme and almost without decor... For an everyday look, some courage is allowed, in which case you can pick up some non-trivial, brighter accessories. For example, arrow clips or cufflinks with a superhero print look very impressive.

Of no small importance is also watch selection, since it is they who primarily indicate the social status of a man and his taste. With a thin herring tie A watch with a small dial and a narrow strap looks the most harmonious. Ideally, the metal of the buckle and watch should be in harmony with the clips and cufflinks, for example, if you have a silver watch, then all other accessories should also be made in silver.

Stylish looks

In a skinny tie, you can appear not only in the work office, but also at festive events and informal meetings.

  • For the formation of a business bow is suitable monochrome narrow tie in black or dark blue, in tandem, you can take a tight-fitting shirt with a laconic collar. Oversized blazers and shirts are best avoided.

The width of the herring dictates the corresponding silhouette - in order to look truly fashionable and effective, clothes must fit perfectly.

  • Looks very impressive combination of a black shirt and a solid color accessory in bright colors... In this case, the color of the tie will effectively contrast with the shirt; you can choose models in fuchsia, purple, as well as turquoise, lemon yellow, white or even red.
  • However, if you are not a fan of dark shirts, then you will be able to stand out from the crowd. light shirt. The most important thing is that the tie in combination with it gives a bright accent.
  • In a more informal situation, a narrow tie can be combined with the same shirt, only it is better to wrap the sleeves in it, and a vest will help to complement the daring bow. Herring is a must for any casual look.

Advice! If you intend to wear a thin tie to the office, be sure to make sure it does not conflict with the company's dress code.

no comments

clothing

Accessories

Hairstyles